PRODUCT FEATURES
- Magnetic gear made with plastic bracket—inexpensive, light, weight, Non-corrosion, resistant to high temperature.
- Magnetic gear made with aluminum alloy bracket—fair price, moderate corrosion resistance, light weight, Good thermal conductivity, Not resistant to high temperature, conductor of electricity.
- Magnetic gear made with stainless steel bracket—expensive, highly resistant to corrosion, high hardness, wear-resistant, high-temperature resistance,does not react with food.
PRODUCT PROPERTIES
Advantages of magnetic gears:
- Contactless
- Environmental friendly
- Permanent-magnetic
- Maintenance-free
- no noise
- electronic product
- aerospace field
- food production equipment
- wind power generation
- new energy vehicles
- smart robot
PRODUCT DESCRIPTION
The magnetic gear is a device for non-contact power transmission using the interaction of the magnetic poles' attraction and repulsion. Magnetic gears are products that are driven in a non-contact state on production lines such as LCD, PDP, PCB, OLED, and SOLARCELL that do not allow fine impurities in a clean environment. Replaces mechanical gears that rely on friction to drive.The magnetic gear is composed of two parts: NdFeB magnet ring and bracket base. The magnetic ring of the magnetic gear is the most important part of the magnetic drive wheel. The height of its magnetic area and the number of teeth determine the torque of the magnetic gear.
PRODUCT PARAMETERS
| Series | (D)Outer diameter | Pole Qty | (d)Inner diameter | C | L | Torque (interval:1mm) |
L | l | N | M |
|---|---|---|---|---|---|---|---|---|---|---|
| CM4212P-□PE | 42 | 12P | 10,12,15 20 25 | 21 | 32.5 | 0.3N.m | 13 | 8 | 2.5 | M3 |
| CM3508P-□PE | 35 | 8P | 10,12,15,20 | 21.5 | 33 | 0.27N.m | 13 | 8 | 2.5 | M3 |
| CM3510P-□PE | 35 | 10P | 10,12,15,20 | 21.5 | 33 | 0.23N.m | 15 | 10 | 2.5 | M3 |
| CM3512P-□PE | 35 | 12P | 10,12,15,20 | 21.5 | 33 | 0.20N.m | 21 | 15 | 3 | M3 |
| CM3208P-□PE | 32 | 8P | 20 15 10 | 20 | 32.5 | 0.2N.m | 21 | 15 | 3 | M3 |
| CM3210P-□PE | 32 | 10P | 20 15 10 | 20 | 32.5 | 0.16N.m | 21 | 14 | 3.5 | M4 |
| CM2608P-□PE | 26 | 8P | 8,10,12,15 | 14 | 26 | 0.12N.m | 21 | 14 | 3.5 | M4 |
| CM2610P-□PE | 26 | 10P | 8,10,12,15 | 14 | 26 | 0.1N.m | 21 | 14 | 3.5 | M4 |
| CM2106P-□PE | 21 | 6P | 10 | 15 | 26.5 | 0.11N.m | 25 | 18 | 3.5 | M4 |
| CM2108P-□PE | 21 | 8P | 10 | 15 | 26.5 | 0.07N.m | 25 | 18 | 3.5 | M4 |
| CM2106PL-□PE | 21 | 6P | 10 | 30 | 41.5 | 0.15N.m | 30 | 20 | 5 | M4 |
WARNING
- If there are screws or other small iron filings in the environment, it is easy to be adsorbed to the surface of the magnetic wheel. Usually, pay attention to check whether there is any foreign matter on the surface of the magnetic wheel, and clean it in time.
- If there is dust on the surface of the magnetic wheel, it should be cleaned in time. If the dust adsorbed on the magnetic wheel cannot be removed with a dust-free cloth, it can be removed with adhesive tape.
- Check whether the coating on the surface of the magnetic wheel is corroded or blistered.
MAYBE YOU NEED TO KNOW
-
How to order magnetic gears in standard models?
We accept orders in any quantity, but because the price of raw materials (rare earth) changes frequently, we will add or deduct the latest price in the supplementary shipping cost, anyway, our products here are the most cost-effective.
How to customize magnetic gear?
We accept customization in any quantity, please contact me after referring to the custom models below.
0 Reviews
Your rating